When to Replace a Spa Cover

Published: 01st August 2011
Views: N/A
Ask About This Article Print Republish This Article
One important piece of equipment for any spa would be the cover. These help keep water at the desired temperature and keep out any debris. People may find that replacing a cover should be done on a relatively frequent basis. There are a few factors to consider.

The cover may become waterlogged over time. This can be a potentially risky situation, as it may become increasingly heavy and difficult to lift. Since the inside of it is usually composed of foam, this problem can occur quite frequently. When the foam is saturated, it will also diminish the efficiency. This will then have the potential to increase energy bills.

Since it is going to be exposed to the elements, over time it can become worn out. Seams may become ripped and water may collect on the top. It should be inspected frequently to ensure that there is nothing that is damaged.

When it is determined that it is time for a replacement, there are a number of things that should be reviewed. Covers are not inexpensive, so the new one should be chosen carefully.


The thickness and density of the cover will vary. Generally, there is a slope to it that will direct rain and snow away from the center and off the top. The thicker it is, the heavier a load can be supported. If the top is at deck level where people would possibly be walking on top, there are specific types that are designed for this. These are basically reinforced with fiberglass on the top and bottom. The density will vary and is measured by cubic feet. A lower measurement will mean that it is easier to lift, and it is also going to be less expensive while still providing good insulation.

No matter which model or style is chosen, it should be one that can be repaired over time. There should be spa replacement parts available so things such as hinges or cover locks can be replaced if they become damage or broken.

Finally, the R-value should be considered. The higher the number, the better the rating and the better job it will do at insulation. This should not be the only consideration, but should be an important factor to look at before the final decision is made.


A spa cover should be in good condition to properly protect and insulate the spa. Any homeowner should be able to recognize the signs of a damaged one that is in need of replacement and make a wise choice on the new one.

If you are interested in finding hot tub spa supplies, be sure to visit http://www.hottubspasupplies.com/.

This article is free for republishing
Source: http://artjones.articlealley.com/when-to-replace-a-spa-cover-2324557.html


Report this article Ask About This Article Print Republish This Article


Loading...
More to Explore
 


Ask a Professional Online Now
27 Experts are Online. Ask a Question, Get an Answer ASAP.
Type your question here...
Optional:
Select...